Artificial intelligence assists in dental care and jaw surgery

A model locates nerve canals in the lower jaw quickly and precisely, helping radiologists and dentists save time and effort.

Useita rinnakkaisia röntgenkuvia leuasta ja hampaista. Kuviin on merkitty keltaisella alaleuan hermokanavan sijainti.
Image: (CC BY 4.0)

A dentist inserting a tooth implant must know the exact location of the nerve canal in the patient’s lower jaw to plan the size and position of the implant, along with the overall procedure. This requires X-ray images in which the dentist or radiologist manually specifies the location of the canal point by point. Studying and analysing these images can be arduous and time-consuming.

Dental equipment manufacturer Planmeca, the Finnish Center for Artificial Intelligence (FCAI) and Tampere University Hospital (Tays) joined forces to tackle the problem. The result is an AI-based model that locates the lower jaw nerve canal in 3D X-rays faster than a human and with better precision than other automated methods. 

‘The collaboration arose from the needs of experts practising clinical work and from seeking ways to help their everyday work. A lot of time can be saved by using artificial intelligence in patient treatment planning,’ says Vesa Varjonen, Vice President of Research and Technology at Planmeca.

The method is based on training deep neural networks with a mass of clinical data, comprised of three-dimensional images rendered with cone beam computed tomography (CBCT). 

‘Tampere University Hospital provided us with extensive and versatile clinical materials produced with several 3D-imaging devices. The data was divided at random and part of it used for training the neural networks and part of it isolated for testing and validating the designed method,’ says Aalto University doctoral researcher Jaakko Sahlsten.

Artificial intelligence is an efficient and reliable tool

Nerves that control the motor functions of the jaw and facial senses run in the nerve canal of the lower jaw, the mandibular canal. In addition to implant placement, its location is crucial in wisdom teeth removal and jaw surgery. The location and route of the canal running inside the jawbone is unique to each person.

‘One of the challenges in training the AI model was that the size of the mandibular canal in a 3D X-ray of the skull is very small compared to the data in the overall image. As a dataset, this type of training material is highly unbalanced,’ Sahlsten notes.

Working together with Tays radiologists was key for harnessing the data into use when training artificial intelligence.

‘When a huge amount of data is fed to the neural network and the location of the mandibular canal is marked in it, it learns to optimise its own internal parameters. The neural network resulting from this learning quickly finds the mandibular canal from the individual 3D data input,’ Varjonen says.

Testing the neural network model with patient data isolated from the research materials demonstrated that the model managed to locate the mandibular canals with high precision: only 1–4% of the cases may be inaccurate.

‘In clinical assessments, experts went through the results produced by the model and discovered that in 96% of the cases they were fully usable in clinical terms. We are highly confident that the model works well,’ Sahlsten says.

Compared to humans, one of the advantages of artificial intelligence is that it always works with equal efficiency and speed. The AI model speeds up the discovery of the mandibular canal and supports radiologists’ and physicians’ decision-making. Final treatment decisions are always made by a health professional.

Publications verify model functionality

Planmeca is a Finnish family business and one of the world’s leading equipment manufacturers in health technology. Its products are exported to over 120 countries around the world. The company’s business is founded on 3D imaging devices for dental care and software that supports them. For Planmeca, collaboration with FCAI and Tays means significant new business potential.

‘Digitality and AI used in imaging equipment are important for us. We will integrate the neural network model developed in this research into our imaging software. This will improve the usability and performance of our equipment,’ Varjonen says.

The scientific publications produced in the collaboration are important for all project partners. Some of the results werw published in Nature’s Scientific Reports.

‘Peer-reviewed publications are solid evidence of the functionality of the model. Deep learning has not previously been used in tasks of this type, which adds to the value of the publications. They also promote doctoral candidates’ thesis work,’ Sahlsten says.

‘The publications will be important for us when applying for a medical device approval for our software. They demonstrate that the software has been designed according to software development processes and scrutinised through all required phases,’ Varjonen notes.

In addition to locating the lower jaw nerve canal, the collaborative project between Planmeca, FCAI and Tays also covered the development of a neural network model for orthognathic surgery, in which anomalies in the lower face area are corrected through surgical measures. 

‘The model helps to identify landmarks in the skull area for correcting malocclusion and planning jaw alignment surgery. The same patient data was also used for another AI application,’ Varjonen says.

Going forward, artificial intelligence will have a lot to offer in health applications.

‘I see artificial intelligence as a very powerful tool that physicians and other experts can use when making their first assessments or to get alternative opinions. The challenge with deep learning models is that we cannot give definite grounds as to why the model reaches a specific outcome. Further research is needed to increase the explainability and transparency of the models,’ Sahlsten concludes.

Text: Marjukka Puolakka 

This article has been published in the Aalto University Magazine issue 32, April 2023.

A man and a woman looking at computer screen.

Planmeca and FCAI collaboration: Machine learning for oral and maxillofacial imaging

The second video in FCAI's new video series presents collaboration between FCAI, health equipment manufacturer Planmeca and Tampere University Hospital.

Computer image of human skull and jawline

University collaboration brings a scope of new possibilities for Planmeca’s business

FCAI, Planmeca and Tampere University Hospital have developed an artificial intelligence method that helps, for example, with the placement of teeth implants.


Finnish Center for Artificial Intelligence (external link)

The Finnish Center for Artificial Intelligence FCAI is a research hub initiated by Aalto University, the University of Helsinki, and the Technical Research Centre of Finland VTT. The goal of FCAI is to develop new types of artificial intelligence that can work with humans in complex environments, and help modernize Finnish industry. FCAI is one of the national flagships of the Academy of Finland.

  • Published:
  • Updated:
URL copied!

Read more news

Ursula von der Leyen in her opening speech
Cooperation, Research & Art Published:

The New European Bauhaus festival brought together European decision-makers and experts in cross-sectoral sustainable development

Aalto University participated in the New European Bauhaus Festival with its sustainable construction exhibition, Time out! Rethinking construction.
Olli Ikkana in Otaniemi, photo by Lasse Lecklin.
Research & Art Published:

Bioinspired colours and adaptable materials - Professor Olli Ikkala's third EU project builds on living systems

Department of Applied Physics Professor Olli Ikkala received his third Advanced Grant from the European Research Council (ERC) on 11 April 2024. The funding amounts to €2.5 million and the project will run for five years.
Professor Antti Oulasvirta. Photo: Aalto University / Jaakko Kahilaniemi
Press releases, Research & Art Published:

Researchers investigate how AI could better understand humans

Antti Oulasvirta has received a EUR 2.5 million Advanced Grant by the European Research Council (ERC) for the study of user models.
Kuvituskuva, jossa kirkkain värein piirretty tyttö katsoo graafista kuviota.
Research & Art Published:

How to put education policy to the test

Finland is testing changes in national education before committing to them – and showing how randcomized controlled trials can take the guesswork out of policy-making