Junhe Lian

Junhe Lian

Apulaisprofessori
Mechanical Engineering
Apulaisprofessori

 

 

Full researcher profile
https://research.aalto.fi/...

Yhteystiedot

Sähköposti
[email protected]
Postiosoite
Sähkömiehentie 3 02150 Espoo Finland

Julkaisut

Mechanical Deformation of Lithium-Ion Pouch Cells under in-plane Loads-Part II

Junhe Lian, Marco Koch, Wei Li, Massachusetts Institute Technology, Massachusetts Institute Technology 2020 Journal of the Electrochemical Society

Influence of surface roughness on cold formability in bending processes

Peerapon Wechsuwanmanee, Junhe Lian, Fuhui Shen, Sebastian Münstermann 2020 INTERNATIONAL JOURNAL OF MATERIAL FORMING

Temperature dependence of plastic flow, anisotropy and ductile fracture

Junhe Lian, Wenqi Liu, Yannik Sparrer, Fuhui Shen, Sebastian Münstermann 2020 23rd International Conference on Material Forming (ESAFORM 2020)

Mechanical Deformation of Lithium-Ion Pouch Cells under In-Plane Loads-Part I

Juner Zhu, Marco Miguel Koch, Junhe Lian, Wei Li, Tomasz Wierzbicki 2020 Journal of the Electrochemical Society

Numerical Evaluation of Surface Roughness Influences on Cold Formability of Dual-Phase Steel

Peerapon Wechsuwanmanee, Junhe Lian, Wenqi Liu, Sebastian Münstermann 2020 Steel Research International

Crystallographic orientation and spatially resolved damage in a dispersion-hardened Al alloy

Qingge Xie, Junhe Lian, Jurij J. Sidor, Fengwei Sun, Xingchen Yan, Chaoyue Chen, Tingkun Liu, Weijian Chen, Ping Yang, Ke An, Yandong Wang 2020 Acta Materialia

Investigation on the ductile fracture of high-strength pipeline steels using a partial anisotropic damage mechanics model

Fuhui Shen, Sebastian Muenstermann, Junhe Lian 2020 Engineering Fracture Mechanics

An evolving plasticity model considering anisotropy, thermal softening and dynamic strain aging

Fuhui Shen, Sebastian Münstermann, Junhe Lian 2020 INTERNATIONAL JOURNAL OF PLASTICITY

Prediction of crack formation in the progressive folding of square tubes during dynamic axial crushing

Wenqi Liu, Junhe Lian, Sebastian Münstermann, Chongyang Zeng, Xiangfan Fang 2020 International Journal of Mechanical Sciences

Microstructure effects on the plastic anisotropy of a fine-structured dual-phase steel

Wenqi Liu, Junhe Lian 2020 23rd International Conference on Material Forming (ESAFORM 2020)

A strategy for synthetic microstructure generation and crystal plasticity parameter calibration of fine-grain-structured dual-phase steel

Wenqi Liu, Junhe Lian, Nikolaos Aravas, Sebastian Münstermann 2020 INTERNATIONAL JOURNAL OF PLASTICITY

Effect of plastic strain and ductile damage on elastic modulus of multiphase steel and its impact on springback prediction

Sebastian Münstermann, Yannik Sparrer, Yuan Yao, Junhe Lian, Rickmer Meya, Till Clausmeyer, A. Erman Tekkaya 2019 Proceedings of the 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019

Finite element model in abrasion analysis for single-asperity scratch test

P. Wechsuwanmanee, J. Lian, J. Sukumaran, H. Ben Hamouda, P. De Baets, S. Münstermann 2019 Proceedings of the 7th International Conference on Fracture Fatigue and Wear, FFW 2018

Forming limit prediction by the Marciniak–Kuczynski model coupled with the evolving non-associated Hill48 plasticity model

Fuhui Shen, Sebastian Münstermann, Junhe Lian 2019 Journal of Materials Processing Technology

Anisotropic plasticity model considering the dynamic strain ageing effects

Fuhui Shen, Junhe Lian, Sebastian Münstermann, Valentin Kokotin, Thomas Pretorius 2019 Proceedings of the 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019

A strain-gradient isotropic elastoplastic damage model with J3 dependence

I. Papadioti, N. Aravas, J. Lian, S. Münstermann 2019 International Journal of Solids and Structures

Surface roughness influences on localization and damage during forming of DP1000 sheet steel

Sebastian Münstermann, Peerapon Wechsuwanmanee, Wenqi Liu, Junhe Lian 2019 18th International Conference on Sheet Metal, SHEMET 2019, New Trends and Developments in Sheet Metal Processing

Modelling the surface roughness influence on the hole expansion ratio of multiphase steel

S. Münstermann, P. Wechsuwanmanee, J. Lian 2019 IOP Conference Series: Materials Science and Engineering

Crystal plasticity modelling of flow behavior under various strain rates

Junhe Lian, Wenqi Liu, Wenwen Zhang, Fuhui Shen, Sebastian Münstermann 2019 Proceedings of the 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019

Prediction of shear crack formation of lithium-ion batteries under rod indentation : Comparison of seven failure criteria

Junhe Lian, Tomasz Wierzbicki, Juner Zhu, Wei Li 2019 Engineering Fracture Mechanics

Micromechanical modeling of cleavage fracture for a ferritic-pearlitic steel

Jinshan He, Zhengyin Piao, Xitao Wang, Junhe Lian, Sebastian Münstermann 2019 Engineering Fracture Mechanics

Delayed cracking behavior of a meta-stable austenitic stainless steel under bending condition

Jinshan He, Xiaofei Guo, Junhe Lian, Sebastian Münstermann, Wolfgang Bleck 2019 MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Quantitative Analysis of Inclusion Engineering on the Fatigue Property Improvement of Bearing Steel

Chao Gu, Min Wang, Yanping Bao, Fuming Wang, Junhe Lian 2019 Metals

Numerical study of the effect of inclusions on the residual stress distribution in high-strength martensitic steels during cooling

Chao Gu, Junhe Lian, Yanping Bao, Wei Xiao, Sebastian Münstermann 2019 Applied Sciences (Switzerland)

Microstructure-based fatigue modelling with residual stresses: Prediction of the microcrack initiation around inclusions

Chao Gu, Junhe Lian, Yanping Bao, Sebastian Münstermann 2019 Materials Science and Engineering A

Microstructure-based fatigue modelling with residual stresses: Prediction of the fatigue life for various inclusion sizes

Chao Gu, Junhe Lian, Yanping Bao, Qingge Xie, Sebastian Münstermann 2019 INTERNATIONAL JOURNAL OF FATIGUE

Modeling of plasticity and fracture behavior of X65 steels : seam weld and seamless pipes

Marcelo Paredes, Junhe Lian, Tomasz Wierzbicki, Mihaela E. Cristea, Sebastian Münstermann, Philippe Darcis 2018 International Journal of Fracture

The lattice strain ratio in characterizing the grain-to-grain interaction effect and its specific insight on the plastic deformation of polycrystalline materials

Qingge Xie, Junhe Lian, Fengwei Sun, Bin Gan, Yandong Wang 2018 Journal of Strain Analysis for Engineering Design

The in-depth residual strain heterogeneities due to an indentation and a laser shock peening for Ti-6Al-4V titanium alloy

Q. Xie, R. Li, Y. D. Wang, R. Su, J. Lian, Y. Ren, W. Zheng, X. Zhou, Y. D. Wang 2018 MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effects of the isotropic and anisotropic hardening within each grain on the evolution of the flow stress, the r-value and the deformation texture of tensile tests for AA6016 sheets

Q. Xie, A. Van Bael, Y. G. An, J. Lian, J. J. Sidor 2018 MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Forming limit curves of DP600 determined in high-speed Nakajima tests and predicted by two different strain-rate-sensitive models

Nathalie Weiß-Borkowski, Junhe Lian, Alan Camberg, Thomas Tröster, Sebastian Münstermann, Wolfgang Bleck, Helmut Gese, Helmut Richter 2018 Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018

An Experimental and Numerical Investigation of the Anisotropic Plasticity and Fracture Properties of High Strength Steels from Laboratory to Component Scales

Fuhui Shen, Junhe Lian, Sebastian Münstermann, Valentin Kokotin, Thomas Pretorius 2018 ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY

A comparative study on the forming limit diagram prediction between Marciniak-Kuczynski model and modified maximum force criterion by using the evolving non-associated Hill48 plasticity model

Fuhui Shen, Junhe Lian, Sebastian Münstermann 2018 Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018

Grain Orientation Dependence of the Residual Lattice Strain in a Cold Rolled Interstitial-Free Steel

Qingge Xie, Sarma Gorti, Jurij J. Sidor, Yu Guo An, Yan Dong Wang, Junhe Lian, Haoyu Lan, Ke An 2018 Steel Research International

A numerical approach to evaluate roughness effects on localization and damage in sheet materials

S. Münstermann, P. Wechsuwanmanee, W. Liu, J. Lian 2018 IOP Conference Series: Materials Science and Engineering

Forming limit prediction by an evolving non-quadratic yield criterion considering the anisotropic hardening and r-value evolution

Junhe Lian, Sebastian Münstermann 2018 Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018

Evolution of plastic anisotropy and strain rate sensitivity

Junhe Lian, Fuhui Shen, Sebastian Münstermann 2018 Journal of Physics: Conference Series

An evolving non-associated Hill48 plasticity model accounting for anisotropic hardening and r-value evolution and its application to forming limit prediction

Junhe Lian, Fuhui Shen, Xiaoxu Jia, Deok Chan Ahn, Dong Chul Chae, Sebastian Münstermann, Wolfgang Bleck 2018 International Journal of Solids and Structures

Fracture properties of zinc coating layers in a galvannealed steel and an electrolytically galvanized steel

Jinshan He, Junhe Lian, Anke Aretz, Napat Vajragupta, Ude Hangen, Frank Goodwin, Sebastian Münstermann 2018 MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

An Experimental Study on the Impact of Deoxidation Methods on the Fatigue Properties of Bearing Steels

Chao Gu, Yan Ping Bao, Peng Gan, Jun He Lian, Sebastian Münstermann 2018 Steel Research International

A microstructure sensitive modeling approach for fatigue life prediction considering the residual stress effect from heat treatment

Chao Gu, Junhe Lian, Yanping Bao, Sebastian Münstermann 2018 Procedia Structural Integrity

Dynamic fracture of a dual phase automotive steel

Sarath Chandran, Patricia Verleysen, Junhe Lian, Wenqi Liu, Sebastian Münstermann 2018 DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading

Plasticity and failure behavior modeling of high-strength steels under various strain rates and temperatures : microstructure to components

Junhe Lian, Wenqi Liu, Ioanna Papadioti, Ilias Bellas, Sarath Chandran, Patricia Verleysen, Helmut Richter, Nikolaos Aravas, Sebastian Münstermann 2018 Procedia Structural Integrity

Comparative Study on Damage Evolution during Sheet Metal Forming of Steels DP600 and DP1000

S. Münstermann, J. Lian, F. Pütz, M. Könemann, V. Brinnel 2017 Journal of Physics: Conference Series

Prediction of plasticity and damage initiation behaviour of C45E + N steel by micromechanical modelling

B. Wu, N. Vajragupta, J. Lian, U. Hangen, P. Wechsuwanmanee, S. Münstermann 2017 Materials and Design

Modeling of Chip Breakage in Machining of AISI 1045 Steel by Using an Improved Damage Mechanics Model

Bo Wu, Stefan Buchkremer, Sebastian Münstermann, Junhe Lian, Drazen Veselovac, Wolfgang Bleck, Fritz Klocke 2017 Steel Research International

Extension of the modified Bai-Wierzbicki model for predicting ductile fracture under complex loading conditions

B. Wu, X. Li, Y. Di, V. Brinnel, J. Lian, S. Münstermann 2017 Fatigue and Fracture of Engineering Materials and Structures

Forming limit curves determined in high-speed Nakajima tests and predicted by a strain rate sensitive model

Nathalie Weiß-Borkowski, Juhne Lian, Thorsten Marten, Thomas Tröster, Sebastian Münstermann, Wolfgang Bleck 2017 Proceedings of the 20th International ESAFORM Conference on Material Forming, ESAFORM 2017

Dynamic Fracture Behavior of High Strength Pipeline Steel

Sarath Chandran, Patricia Verleysen, Junhe Lian, Wenqi Liu, Steven Cooreman, Sebastian Münstermann 2017 Procedia Engineering

Crystal plasticity assisted prediction on the yield locus evolution and forming limit curves

Junhe Lian, Wenqi Liu, Fuhui Shen, Sebastian Münstermann 2017 Proceedings of the 20th International ESAFORM Conference on Material Forming, ESAFORM 2017

Investigation on micromechanism and stress state effects on cleavage fracture of ferritic-pearlitic steel at −196 °C

Jinshan He, Junhe Lian, Georg Golisch, An He, Yidu Di, Sebastian Münsterman 2017 Materials Science and Engineering A

Investigation on micromechanism and stress state effects on cleavage fracture of ferritic-pearlitic steel at -196 degrees C (vol 686, pg 134, 2017)

Jinshan He, Junhe Lian, Georg Golisch, An He, Yidu Di, Sebastian Münstermann 2017 MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A generalized Orowan model for cleavage fracture

Jinshan He, Junhe Lian, Georg Golisch, Xiaodong Jie, Sebastian Münstermann 2017 Engineering Fracture Mechanics

Design of an Experimental Program to Assess the Dynamic Fracture Properties of a Dual Phase Automotive Steel

Sarath Chandran, Patricia Verleysen, Junhe Lian, Wenqi Liu, Sebastian Münstermann 2017 Procedia Engineering

Influence of microstructural features on the propagation of microstructurally short fatigue cracks in structural steels

M. Sharaf, J. Lian, N. Vajragupta, S. Münstermann, W. Bleck, B. Schmaling, A. Ma, A. Hartmaier 2016 Fatigue of Materials II

Damage and fracture loci for a dual-phase steel and a high-strength low-alloyed steel

Junhe Lian, Sebastian Münstermann, Wolfgang Bleck 2016 ESAFORM 2016

Cold formability prediction by the modified maximum force criterion with a non-associated Hill48 model accounting for anisotropic hardening

J. Lian, D. C. Ahn, D. C. Chae, S. Münstermann, W. Bleck 2016 Journal of Physics: Conference Series

The second Sandia Fracture Challenge

B. L. Boyce, S. L.B. Kramer, T. R. Bosiljevac, E. Corona, J. A. Moore, K. Elkhodary, C. H.M. Simha, B. W. Williams, A. R. Cerrone, A. Nonn, J. D. Hochhalter, G. F. Bomarito, J. E. Warner, B. J. Carter, D. H. Warner, A. R. Ingraffea, T. Zhang, X. Fang, J. Lua, V. Chiaruttini, M. Mazière, S. Feld-Payet, V. A. Yastrebov, J. Besson, J. L. Chaboche, J. Lian, Y. Di, B. Wu, D. Novokshanov, N. Vajragupta, P. Kucharczyk, V. Brinnel, B. Döbereiner, S. Münstermann, M. K. Neilsen, K. Dion, K. N. Karlson, J. W. Foulk, A. A. Brown, M. G. Veilleux, J. L. Bignell, S. E. Sanborn, C. A. Jones, P. D. Mattie, K. Pack, T. Wierzbicki, S. W. Chi, S. P. Lin, A. Mahdavi, J. Predan 2016 International Journal of Fracture

The Second Blind Sandia Fracture Challenge

Yidu Di, Junhe Lian, Bo Wu, Napat Vajragupta, Denis Novokshanov, Victoria Brinnel, Benedikt Döbereiner, Markus Könemann, Sebastian Münstermann 2016 International Journal of Fracture

A comparative study on the formability prediction of steel sheets by anisotropic models based on associated flow rule and non-associated flow rule

Junhe Lian, Deok Chan Ahn, Dong Chul Chae, Sebastian Münstermann, Wolfgang Bleck 2015 Key Engineering Materials

Cold formability of automotive sheet metals

Junhe Lian, Deok Chan Ahn, Dong Chul Chae, Sebastian Münstermann, Wolfgang Bleck 2015 Sheet Metal 2015

Evaluation of the cold formability of high-strength low-alloy steel plates with the modified Bai-Wierzbicki damage model

J. Lian, J. Wu, S. Münstermann 2015 International Journal of Damage Mechanics

A new model for upper shelf impact toughness assessment with a computationally efficient parameter identification algorithm

Denis Novokshanov, Benedikt Döbereiner, Mohamed Sharaf, Sebastian Münstermann, Junhe Lian 2015 Engineering Fracture Mechanics

A generalized damage model accounting for instability and ductile fracture for sheet metals

Junhe Lian, Xiaoxu Jia, Sebastian Münstermann, Wolfgang Bleck 2014 Material Forming ESAFORM 2014

A method to quantitatively upscale the damage initiation of dual-phase steels under various stress states from microscale to macroscale

Junhe Lian, Hanqi Yang, Napat Vajragupta, Sebastian Münstermann, Wolfgang Bleck 2014 Computational Materials Science

A modified Lemaitre damage model phenomenologically accounting for the Lode angle effect on ductile fracture

Junhe Lian, Yuan Feng, Sebastian Münstermann 2014 20TH EUROPEAN CONFERENCE ON FRACTURE

Modeling the cold formability of dualphase steels on different length scales

Sebastian Münstermann, Junhe Lian, Napat Vajragupta 2014 20TH EUROPEAN CONFERENCE ON FRACTURE

The modeling scheme to evaluate the influence of microstructure features on microcrack formation of DP-steel

N. Vajragupta, P. Wechsuwanmanee, J. Lian, M. Sharaf, S. Münstermann, A. Ma, A. Hartmaier, W. Bleck 2014 Computational Materials Science

Predicting lower bound damage curves for high-strength low-alloy steels

S. Münstermann, C. Schruff, J. Lian, B. Döbereiner, V. Brinnel, B. Wu 2013 Fatigue and Fracture of Engineering Materials and Structures

The influence of grain size distribution on strain hardening behavior for dual phase steels using statistically informed artificial microstructure model and crystal plasticity

Napat Vajragupta, Junhe Lian, Mohamed Sharaf, Sebastian Münstermann, Wolfgang Bleck 2013 Computational Plasticity XII

A hybrid approach for modelling of plasticity and failure behaviour of advanced high-strength steel sheets

J. Lian, M. Sharaf, F. Archie, S. Münstermann 2013 International Journal of Damage Mechanics

Evaluation of the cold formability of multiphase steels by damage mechanics approaches

Sebastian Münstermann, Junhe Lian, Napat Vajragupta 2013 Materialpruefung/Materials Testing

Micromechanical modelling of damage and failure in dual phase steels

Junhe Lian, Napat Vajragupta, Sebastian Münstermann 2013 The Current State-of-the-Art on Material Forming

Crystal plasticity modeling on single crystal and polycrystal of a ferritic steel sheet

J. Lian, S. Gao, M. Sharaf, N. Vajragupta, B. Schmaling, A. Ma, S. Münstermann, A. Hartmaier, W. Bleck 2012 AIST Steel Properties and Applications Conference Proceedings - Combined with MS and T'12, Materials Science and Technology 2012

Modeling of damage and failure of dual phase steel in Nakajima test

Junhe Lian, Pengfei Liu, Sebastian Münstermann 2012 Advances in Fracture and Damage Mechanics XI

Design of damage tolerance in high-strength steels

Sebastian Münstermann, Junhe Lian, Wolfgang Bleck 2012 International Journal of Materials Research

Exploiting the property profile of high strength steels by damage mechanics approaches

Sebastian Münstermann, Mohamed Sharaf, Junhe Lian, Georg Golisch 2012 Materialpruefung/Materials Testing

Influence of microstructural features on the propagation of microstructurally short fatigue cracks in structural steels

M. Sharaf, J. Lian, N. Vajragupta, S. Münstermann, W. Bleck, B. Schmaling, A. Ma, A. Hartmaier 2012 Materials Science and Technology Conference and Exhibition 2012, MS and T 2012

Influence of Microstructural Features on the Propagation of Microstructurally Short Fatigue Cracks in Structural Steels

M. Sharaf, J. Lian, N. Vajragupta, S. Münstermann, W. Bleck, B. Schmaling, A. Ma, A. Hartmaier 2012 Fatigue of Materials II

Numerical determination of the damage parameters of a dualphase sheet steel

Ole West, Junhe Lian, Sebastian Münstermann, Wolfgang Bleck 2012 ISIJ International

On application of a damage plasticity model to sheet metal forming of DP steel

J. Lian, N. Vajragupta, S. Munstermann, W. Bleck 2011 Special Edition