Esko Niemi

Professori
Professori
T212 Mechanical Engineering
Full researcher profile
https://research.aalto.fi/...

Kontakuppgifter

Telefonnummer
+358405031384

Forskningsgrupp

  • Materiaaleista tuotteiksi, Professori

Publikationer

Prediction and validation of melt pool dimensions and geometric distortions of additively manufactured AlSi10Mg

Rizwan Ullah, Junhe Lian, Jan Sher Akmal, Jiaojiao Wu, Esko Niemi 2023 International Journal of Advanced Manufacturing Technology

Effect of Finite Element Mesh Size and Time-Increment on Predicting Part-Scale Temperature for Powder Bed Fusion Process

Rizwan Ullah, Junhe Lian, Jiaojiao Wu, Esko Niemi 2022 Achievements and Trends in Material Forming- Peer-reviewed extended papers selected from the 25th International Conference on Material Forming, ESAFORM 2022

A Teaching Factory knowledge exchange network

Harry Bikas, Pierre E. C. Johansson, Rosa Di Falco, John Stavridis, Esko Niemi, Zigor Azpilgain, Luca Fumagalli, Bastian Thiede, Panagiotis Stavropoulos 2021 Proceedings of the Conference on Learning Factories (CLF) 2021

QR code-based material flow monitoring in a subcontractor manufacturer network

Jaakko Peltokorpi, Lauri Isojärvi, Kai Häkkinen, Esko Niemi 2021 Procedia Manufacturing

Anisotropy of additively manufactured 18Ni-300 maraging steel: Threads and surface characteristics

Rizwan Ullah, Jan Sher Akmal, Sampsa Laakso, Esko Niemi 2020 Procedia CIRP

Anisotropy of additively manufactured AlSi10Mg: threads and surface integrity

Rizwan Ullah, Jan Sher Akmal, Sampsa Laakso, Esko Niemi 2020 International Journal of Advanced Manufacturing Technology

Analysis of the effects of group size and learning on manual assembly performance

Jaakko Peltokorpi, Esko Niemi 2019 25th International Conference on Production Research Manufacturing Innovation: Cyber Physical Manufacturing, August 9-14, 2019, Chicago, Illinois (USA)

Effects of group size and learning on manual assembly performance: an experimental study

Jaakko Peltokorpi, Esko Niemi 2019 International Journal of Production Research

Differences between worker pairs in manual assembly: a case study

Jaakko Peltokorpi, Esko Niemi 2018 Proceeedings of the 8th Swedish Production Symposium (SPS 2018)

How Lean transformation affects scheduling

Henri Tokola, Esko Niemi, Pekka Kyrenius 2017 Robotics and Computer-Integrated Manufacturing

Performances of Simulated Human Planner and Computer in Solving Sequence-Dependent Setup Time Problems

Henri Tokola, Esko Niemi 2017 Proceedings of the 24th International Conference on Production Research, ICPR 24

Agent-based Scheduling in a Job Shop Using Idle Time and Utilization Information

Bilal Ahmad, Henri Tokola, Esko Niemi 2016 Proceedings of the 26th International Conference on Flexible Automation and Intelligent Manufacturing

Determination of material model parameters from orthogonal cutting experiments

Sampsa Vili Antero Laakso, Esko Niemi 2016 PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B: JOURNAL OF ENGINEERING MANUFACTURE

Modified Johnson-Cook flow stress model with thermal softening damping for finite element modeling of cutting

Sampsa Vili Antero Laakso, Esko Niemi 2016 PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B: JOURNAL OF ENGINEERING MANUFACTURE

Block erection in the event of delays in shipbuilding

Henri Alfred Tokola, Esko Niemi, Heikki Remes 2016 Journal of Ship Production and Design

Designing manufacturing dashboards on the basis of a Key Performance Indicator survey

Henri Tokola, Esko Niemi, Christoph Gröger, Eeva Järvenpää 2016 49th CIRP Conference on Manufacturing Systems (CIRP-CMS 2016)

Lean manufacturing methods in simulation literature

Henri Tokola, Esko Niemi, Ville Vaisto 2016 Proceedings : Winter Simulation Conference

Model for Extracting Information from Production Schedule Data

Henri Tokola, Esko Niemi 2016 7th Swedish Production Symposium Conference proceedings

The effect of input/output location in an automated storage/retrieval system with two cranes

Henri Tokola, Esko Niemi 2016 Proceedings : Winter Simulation Conference

Using FEM Simulations of Cutting for Evaluating the Performance of Different Johnson Cook Parameter Sets Acquired with Inverse Methods

Sampsa Vili Antero Laakso, Esko Niemi 2015 25th International Conference on Flexible Automation and Intelligent Manufacturing, Wolverhampton, United Kingdom, June 23-26 2015

Comparing Worker Coordination Policies in Parallel Station Systems with Different Worker Skill Level Distributions

Jaakko Peltokorpi, Esko Niemi, Henri Tokola 2015 25th International Conference on Flexible Automation & Intelligent Manufacturing (FAIM 2015), 23-26 June 2015, Wolverhampton, UK

Avoiding Fragmentation in Miniload Automated Storage and Retrieval Systems

Henri Tokola, Esko Niemi 2015 15th IFAC Symposium on Information Control Problems in Manufacturing (INCOM 2015), Ottawa, Canada, May 11-13, 2015

Block erection sequencing in shipbuilding with general lifting and joining times

Henri Tokola, Esko Niemi, Heikki Remes 2015 Society of Naval Architects and Marine Engineers - Transactions 2015

Shop Floor-Level Control of Manufacturing Companies: An Interview Study in Finland

Henri Tokola, Eeva Järvenpää, Tapio Salonen, Minna Lanz, Mikko Koho, Esko Niemi 2015 MANAGEMENT AND PRODUCTION ENGINEERING REVIEW

Worker coordination policies in parallel station systems: performance models for a set of jobs and for continuous arrival of jobs

Jaakko Peltokorpi, Henri Tokola, Esko Niemi 2014 International Journal of Production Research

A Comparison of Rescheduling Policies for Online Flow Shops to Minimize Tardiness

Henri Tokola, Lauri Ahlroth, Esko Niemi 2014 Engineering Optimization

From Machine Utilisation to Flow time: Effects of Lean Transformation on Scheduling

Henri Tokola, Esko Niemi, Pekka Kyrenius 2014 24th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), May 20-23, 2014, San Antonio, Texas, USA

Investigation of the effect of different cutting parameters on chip formation of low-lead brass with experiments and simulations

Sampsa V.A. Laakso, Mikko Hokka, Esko Niemi, Veli-Tapani Kuokkala 2013 PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B: JOURNAL OF ENGINEERING MANUFACTURE

Block erection sequencing in shipbuilding with general lifting and joining times

Henri Tokola, Esko Niemi, Heikki Remes 2013 Journal of Ship Production and Design

Estimating Short-term Production Planning Challenges in Multi-item Production

Henri Tokola, Esko Niemi 2013 The 22nd International Conference on Production Research (ICPR 22) in Iguassu falls, Brazil on 28 July - 1 August 2013

Optimization of the Welding in the Erection Scheduling of a Suezmax Tanker Ship

H. Tokola, L.F. Assis, Freire R. Moraine, E. Niemi 2013 The 16th International Conference on Computer Applications in Shipbuilding (ICCAS 2013) in Busan, South Korea on 24-26 September 2013

Performance of Self-Adaptive Assembly Line

Niko Kallio, Klaus Heiskanen, Esko Niemi 2012 FAIM 2012 22nd International Conference on Flexible Automation and Intelligent Manufacturing, Helsinki, Finland, June 10th-13th, 2012

Comparison of Balancing Policies in Multi-Item Assembly

Jaakko Peltokorpi, Henri Tokola, Esko Niemi 2012 FAIM 2012 22nd International Conference on Flexible Automation and Intelligent Manufacturing, Helsinki, Finland, June 10th-13th, 2012

Short-term Production Planning Methods from the Cost, Planning and Lead-Time Points of View

Henri Tokola, Esko Niemi 2012 FAIM 2012 - 22nd International Conference on Flexible Automation and Intelligent Manufacturing

Combined Periodical and Reactive Control in Multi-item Production-inventory System

Henri Tokola, Esko Niemi 2011 The 44th CIRP Conference on Manufacturing Systems, Madison, Wisconsin, USA, June 1-3, 2011

The Effect of Short-term Planning Delays in Multi-Item Production-Inventory Systems

Henri Tokola, Esko Niemi 2011 ISAM 2011 International Symposium on Assembly and Manufacturing, Tampere, 25-27 May 2011

The Effect of Worker Skill Distribution and Overmanning on Moving Worker Assembly Lines

J Hytönen, E Niemi, Sonia Peréz 2010 International Conference on Competitive Manufacturing, COMA ´10, Stellenbosch, South Africa, February 3-5,2010

Minimising Backorders in a Multi-Item Production-Inventory System

Henri Tokola, Lauri Ahlroth, Esko Niemi 2010 7th international DAAAM Baltic Conference, 22-24 April 2010, Tallinn, Estonia

Intra-Cell Worker Allocation in Shift Work

Esko Niemi 2009 3rd International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2009) Munich, Germany, October 5th-7th, 2009

Worker Allocation in Make-to-Order Assembly Cells

Esko Niemi 2009 Robotics and Computer-Integrated Manufacturing

Optimal Workforce Allocation for Assembly Lines for Highly Customised Low-volume Products

Joni Hytönen, Esko Niemi, Ville Toivonen 2008 INTERNATIONAL JOURNAL OF SERVICES OPERATIONS AND INFORMATICS

Transformation of Leveled Production Plans into Detailed Schedules in Make-To-Order Manufacturing

Esko Niemi, Ville Toivonen 2008 INTERNATIONAL JOURNAL OF SERVICES OPERATIONS AND INFORMATICS

Worker allocation in make-to-order assembly cells

Esko Niemi 2008 18th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2008, University of Skövde

Assembly Layout Set-up for an Agile Market Environment

Pekka Syvänen, Esko Niemi 2008 International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2008, University of Skövde

Optimal Workforce Allocation For Assembly Lines For Highly Customised Low-volume Products

Joni Hytönen, Esko Niemi, Ville Toivonen 2007 The 17th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2007, Penn State Great Valley, Pennsylvania, USA, 2007

Transformation of Leveled Production Plans into Detailed Schedules in Make-To-Order Manufacturing

Esko Niemi, Ville Toivonen 2007 The 17th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2007, Penn State Great Valley, Pennsylvania, USA, 2007

Production Planning Issues in a Multi-Product Make-to-Order Environment

Ville Toivonen, Esko Niemi 2007 The 17th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2007, Penn State Great Valley, Pennsylvania, USA, 2007

Planning and Scheduling System for Make-To-Order Production

Ville Toivonen, Kimmo Ikkala, Esko Niemi 2006 Annals of CIRP

Project scheduling system for planning make-to-order production

Ville Toivonen, Esko Niemi, Kimmo Ikkala 2006 International Journal of Agile Manufacturing

ICAM 2005 Proceedings Of The International Conference On Agility

Hans Andersin, Esko Niemi, Ville Hirvonen 2005

Transformation of aggregate production plans into detailed schedules in make-to-order manufacturing

Esko Niemi, Ville Toivonen, Kimmo Ikkala 2005 The 18th International Conference on Production Research, University of Salerno, Italy, 2005

Optimal tool magazine operation. Part 2: rotating magazines with buffered tool change

Esko Niemi 2004 International Journal of Advanced Manufacturing Technology

Resource levelling in make-to-order mechanical engineering industry

Esko Niemi 2004 Eighth International Conference on Manufacturing and Management

Nesting strategy for standard parts under variable demand

Esko Niemi 2003 PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B: JOURNAL OF ENGINEERING MANUFACTURE

Optimal tool magazine operation.Part 1: Rotating magazines with unbuffered tool change

Esko Niemi 2003 International Journal of Advanced Manufacturing Technology

Optimization of tool order in a machining center tool magazine

Esko Niemi 2003 17th International Conference on Production Research; Blacksburg, Virginia USA; August 3-7, 2003

Part allocation to nesting layouts under variable demand

Esko Niemi 2003 International Journal of Production Research

Optimisation of sheet metal part nesting under production program constraints

Esko Niemi 2001 The 16th International Conference on Production Research ICPR-16, Prague, Czech Republic, 2001

Machining cost optimization involving shift and overtime work

Esko Niemi 2000 JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING: TRANSACTIONS OF THE ASME

Plant location problem with economies of scale in manufacturing

Esko Niemi 1999 The 15th Conference of the International Foundation for Production Research, Limerick, Ireland, 1999

Comparison of wear characteristics and properties of TiN-coated gear cutting hobs

E. Niemi, Antti S. Korhonen, E. Harju, V. Kauppinen 1986 Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films

Microstructural study of TiN-coated threading taps

S. Vuorinen, E. Niemi, Antti S. Korhonen 1985 Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films